Aluminum Paste: Proper Method for Mixing with Coatings

As a special pigment, aluminum silver paste can impart metallic luster and sparkling effects to coatings. When mixed and used with coatings,
it significantly enhances both the decorative appeal and protective performance of the coating. The following outlines the correct method for
mixing aluminum silver paste with coatings:

I. Preparation of Mixing Materials

Select the appropriate coating: Choose a coating type that matches the specific requirements and application scenario.

Prepare the aluminum silver paste: Ensure the aluminum silver paste is of stable quality, free from impurities and clumps.

II. Determine the Mixing Ratio

Based on the type of coating and the desired effect, determine the proportion of aluminum silver paste to be added. Generally, the amount of
aluminum paste added ranges from 1% to 10% of the total coating weight.

Conduct small-scale tests first to ensure the mixed result meets expectations.

III. Mixing and Stirring

Pour the coating into a clean container, then slowly add the aluminum silver paste according to the determined ratio.

Use a mixer to stir thoroughly, ensuring the aluminum silver paste is evenly dispersed in the coating. Pay attention to the stirring speed and duration
to avoid generating excessive bubbles.

IV. Application and Construction

Before application, ensure the mixed coating is thoroughly stirred, with no sedimentation or layering.

Proceed with coating application according to the coating’s construction instructions, paying attention to the thickness and uniformity of the coating layer.

Maintain a clean environment during construction to avoid contamination from dust and impurities.

V. Safety Precautions

Wear protective equipment, such as gloves and masks, during mixing and application.

Avoid direct contact of aluminum silver paste and coating with skin and eyes. In case of accidental contact, rinse immediately with clean water and seek medical attention.

Store away from fire sources, and avoid high temperatures and direct sunlight.

By following the above steps and precautions, the effectiveness and safety of mixing aluminum silver paste with coatings can be ensured. Proper mixing ratios and application
methods can significantly enhance the performance and appearance of coatings, adding a brilliant metallic luster to various application scenarios.